Chinese wholesale Bare Copper Conductor - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou Detail:
Product Detail
To achieve better tensile strength, using aluminum magnesium alloy rod as the core wire, then cladding copper layer on the surface, after drawing several times, then copper clad aluminum magnesium wire is made.
Advantages: Same as CCA Wire, it has low density, easy to solder and high strength.
Disadvantages: As the conductor contains magnesium, the resistivity compared with pure CCA wire is higher. It is not conductive to make conductor for transporting current.
Product Parameter
|
Product name |
CCAM WIRE |
|
Diameters available [mm] Min – Max |
0.05mm-2.00mm |
|
Density [g/cm³] Nom |
2.95-4.00 |
|
Conductivity [S/m * 106] |
31-36 |
|
IACS [%] Nom |
58-65 |
|
Temperature-Coefficient [10-6/K] Min – Max |
3700 – 4200 |
|
Elongation (1)[%] Nom |
17 |
|
Tensile strength (1)[N/mm²] Nom |
170 |
|
Outer metal by volume[%] Nom |
3-22% |
|
Outer metal by weight[%] Nom |
10-52 |
|
Weldability/Solderability[--] |
++/++ |
|
Properties |
CCAM combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
|
Application |
CATV coaxial cable, large capacity communication network signal electric LAN, control signal cable, cable shielding line, metal hose etc. Aspects. |
IEC 60317(GB/T6109)
The Tech & Specification parameters of our company’s wires are in international unit system, with the unit of millimeter (mm). If use American Wire Gauge (AWG) and British Standard Wire Gauge (SWG) , the following table is a comparison table for your reference.
The most special dimension can be customized as per the requirements of customers.
Comparison of Different Metal Conductors’s Tech& Specification
|
METAL |
Copper |
Aluminium Al 99.5 |
CCA10% |
CCA15% |
CCA20% |
CCAM |
TINNED WIRE |
|
Diameters available |
0.04mm -2.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.05mm-2.00mm |
0.04mm -2.50mm |
|
Density [g/cm³] Nom |
8.93 |
2.70 |
3.30 |
3.63 |
3.96 |
2.95-4.00 |
8.93 |
|
Conductivity[S/m * 106] |
58.5 |
35.85 |
36.46 |
37.37 |
39.64 |
31-36 |
58.5 |
|
IACS[%] Nom |
100 |
62 |
62 |
65 |
69 |
58-65 |
100 |
|
Temperature-Coefficient[10-6/K] Min – Max |
3800 – 4100 |
3800 – 4200 |
3700 – 4200 |
3700 – 4100 |
3700 – 4100 |
3700 – 4200 |
3800 – 4100 |
|
Elongation (1)[%] Nom |
25 |
16 |
14 |
16 |
18 |
17 |
20 |
|
Tensile strength (1)[N/mm²] Nom |
260 |
120 |
140 |
150 |
160 |
170 |
270 |
|
Outer metal by volume[%] Nom |
- |
- |
8-12 |
13-17 |
18-22 |
3-22% |
- |
|
Outer metal by weight[%] Nom |
- |
- |
28-32 |
36-40 |
47-52 |
10-52 |
- |
|
Weldability/Solderability[--] |
++/++ |
+/– |
++/++ |
++/++ |
++/++ |
++/++ |
+++/+++ |
|
Properties |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
Very low density allows high weight reduction, fast heat dissipation, low conductivity |
CCA combines the advantages of Aluminum and Copper. Low density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for diameter 0.10mm and above |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCAM combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
|
Application |
General coil winding for electrical application, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Different electrical application with low weight requirement, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Electrical wire and cable, HF litz wire |
Electrical wire and cable, HF litz wire |
Product detail pictures:
Related Product Guide:
Our business has been focusing on brand strategy. Customers' pleasure is our best advertising. We also offer OEM company for Chinese wholesale Bare Copper Conductor - Micro Coaxial Cable Inner Conductor Copper Clad Aluminum Magnesium Wire Used for High-Frequency Signal Transmission – Shenzhou , The product will supply to all over the world, such as: Turkmenistan, Austria, Peru, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Christina from belarus - 2017.10.23 10:29
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Fernando from Hyderabad - 2018.09.23 18:44
Products categories
-
Europe style for 10 Awg 2 Conductor Cable - Hi...
-
Super Lowest Price Waterproof Heat Shrink - Hi...
-
Hot sale 5 Conductor Trailer Wire - High quali...
-
Original Factory 4 Awg Thhn Copper Wire - High...
-
Wholesale Price China 1 Awg Thhn Copper Wire -...
-
Personlized Products Connecting Wires - High q...