ISO 9001ISO 14001IATF 16949ULREACH
Shenzhou enamelling workshop in Suzhou

Enameled CCA · copper · aluminium magnet wire · Suzhou, China

China’s leading
enameled CCA wire plant.

Shenzhou has clad, drawn and enamelled conductor since 2006. Three plants, 54 enamelling lines and 2,000 tons of enameled copper clad aluminium wire a month — round, flat and self-bonding, class 130–220.

2006Founded in Qidu, Suzhou
20+Years in magnet wire
3Production plants
2,000tEnameled CCA / month

Trusted by motor, transformer and cable makers in

EuropeNorth AmericaMiddle EastSouth AsiaSouth-East AsiaAfrica

01 — Product lines

CCA enameled wire, CCA conductor, copper and aluminium.

Four conductor families, each in round, flat and self-bonding form. Cladding, drawing and enamelling happen in the same group, so diameter, copper ratio and enamel build stay under one quality system.

Also produced: enameled copper, enameled aluminium, CCA, CCAM, flat, tinned and self-bonding wire in four bonding methods.

All product categories

03 — Company strength

Twenty years of one product, done properly.

Shenzhou was founded in Qidu Town, Suzhou — the “cable capital” of China. The group now runs three production companies, with 54 enamelling lines dedicated to enameled CCA.

  • Three production companiesSuzhou Wujiang Shenzhou Bimetallic Cable (headquarters), Suqian Shenzhou Electrical and Yichun Shenyue Electrical Technology.
  • 54 enamelling lines · 2,000 t/monthOutput of enameled CCA wire alone, with capacity reserved for repeat export orders.
  • Early export licence for enameled CCAObtained in 2008; UL certification for enameled CCA, aluminium and copper wire since 2014.
  • Applications across the industryMotors, transformers, inductors, EV drive motors, chargers, voice coils, ballasts and relays.
More about Shenzhou
Enamelling lines at the Shenzhou plant
Enamelling workshop, Wujiang — Suzhou, Jiangsu

04 — From rod to spool

One continuous process.

Copper cladding, drawing, enamelling and testing are controlled in sequence, which is why the copper ratio and enamel build stay repeatable batch after batch.

  1. 01

    Cladding

    A copper tape is welded around an aluminium rod by argon arc welding, bonding the two metals along the full length. The copper ratio is fixed here — 10 %, 15 % or 20 % by volume.

  2. 02

    Drawing

    Multi-pass drawing through diamond dies brings the rod to the final diameter: coarse drawing to 3.00 mm, intermediate to 0.60 mm, then fine drawing for enamelling.

  3. 03

    Enamelling

    Annealing and multi-pass enamelling on 54 lines, with online film-continuity monitoring. The wire is cured, cooled and wound on the specified spool.

  4. 04

    Testing & packing

    Peel-twist, elongation, springback, breakdown voltage, pinhole and solderability tests per batch, then export packing with desiccant and pallet strapping.

05 — Live from the plant

Vlog & production updates

New photos and short videos from the workshop, uploaded by our team and published automatically.

All posts
Enamelled copper wire running from a pay-off spool into the enamelling lineProduction

Pay-off side of an enamelling line

Enamelled copper wire leaving the pay-off and running into the enamelling oven at the Wujiang plant, Suzhou.

#enamelling#magnet wire#production
Full spool of enameled copper wire on a take-up unitProduction

Finished spool on the take-up unit

A full spool of enameled copper wire on the take-up unit, ready for inspection and export packing.

#take-up#quality#packing
Tapered spools of enameled copper wire ready for packingVlog

Tapered spools before export packing

PT-series tapered spools of enameled wire after final inspection — cartoned, strapped and palletised for sea freight.

#packing#spools#export

06 — Quality

Certified, tested, documented.

Every batch is released against IEC 60317 / NEMA MW and our own control plan; certificates and test reports travel with the shipment.

Certificates
ISO 9001Quality management system
ISO 14001Environmental management
IATF 16949Automotive quality management
ULListed magnet wire grades
REACHEU chemical compliance
RoHSRestricted substances
SGSThird-party test reports

In-house laboratory

Peel twist, breakdown voltage, dielectric loss, elongation, springback, solderability, pinhole and online continuity testing — twelve checks on the same site.

See the test equipment
  • Peel twist test
  • High voltage breakdown tester
  • Dielectric loss system
  • Enamel layer continuity tester
  • High temperature breakdown tester
  • Intelligent resistance tester
  • Springback angle tester
  • Elongation tester

07 — News

Exhibitions, customers, plant news

What we have been doing — from CWIEME Berlin to customer audits and capacity upgrades.

All news

08 — Enquiry

Send your specification.

Tell us the conductor, diameter, class and quantity. Our sales engineer — and our AI assistant — reply within one working day.

Phone / WhatsApp+86 13913089910
Working hours

Monday - Saturday, 8:00 - 20:00 (GMT+8)

We reply within one working day. Your details stay with our sales team — no newsletters.