The Tech & Specification parameters of our company’s wires are in international unit system, with the unit of millimeter (mm). If use American Wire Gauge (AWG) and British Standard Wire Gauge (SWG) , the following table is a comparison table for your reference.
The most special dimension can be customized as per the requirements of customers.
Comparison of Different Metal Conductors’s Tech& Specification
METAL |
Copper |
Aluminium Al 99.5 |
CCA10% |
CCA15% |
CCA20% |
CCAM |
TINNED WIRE |
Diameters available |
0.04mm -2.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.10mm -5.50mm |
0.05mm-2.00mm |
0.04mm -2.50mm |
Density [g/cm³] Nom |
8.93 |
2.70 |
3.30 |
3.63 |
3.96 |
2.95-4.00 |
8.93 |
Conductivity[S/m * 106] |
58.5 |
35.85 |
36.46 |
37.37 |
39.64 |
31-36 |
58.5 |
IACS[%] Nom |
100 |
62 |
62 |
65 |
69 |
58-65 |
100 |
Temperature-Coefficient[10-6/K] Min – Max |
3800 – 4100 |
3800 – 4200 |
3700 – 4200 |
3700 – 4100 |
3700 – 4100 |
3700 – 4200 |
3800 – 4100 |
Elongation (1)[%] Nom |
25 |
16 |
14 |
16 |
18 |
17 |
20 |
Tensile strength (1)[N/mm²] Nom |
260 |
120 |
140 |
150 |
160 |
170 |
270 |
Outer metal by volume[%] Nom |
- |
- |
8-12 |
13-17 |
18-22 |
3-22% |
- |
Outer metal by weight[%] Nom |
- |
- |
28-32 |
36-40 |
47-52 |
10-52 |
- |
Weldability/Solderability[--] |
++/++ |
+/– |
++/++ |
++/++ |
++/++ |
++/++ |
+++/+++ |
Properties |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
Very low density allows high weight reduction, fast heat dissipation, low conductivity |
CCA combines the advantages of Aluminum and Copper. Low density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for diameter 0.10mm and above |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCA combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to Aluminum, good weldability and solderability, recommended for very fine sizes down to 0.10mm |
CCAM combines the advantages of Aluminum and Copper. Lower density allows weight reduction, elevated conductivity and tensile strength compared to CCA, good weldability and solderability, recommended for very fine sizes down to 0.05mm |
Very high conductivity, good tensile strength, high elongation, excellent windability, good weldability and solderability |
Application |
General coil winding for electrical application, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Different electrical application with low weight requirement, HF litz wire. For use in industrial, automotive, appliance, consumer electronics |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Loudspeaker, headphone and earphone, HDD, induction heating with the need of good termination, HF litz wire |
Electrical wire and cable, HF litz wire |
Electrical wire and cable, HF litz wire |