China High Quality Enameled Aluminium Magnet Wire Bakeng sa Motlakase Fan Motor Winding bahlahisi le bafani ba thepa

High Quality Enameled Aluminium Magnet Wire Bakeng sa Motlakase Fan Motor Winding Featured Image

Tlhaloso e Khutšoanyane:

Enameled Aluminium Wire ke mefuta e mengata e fapaneng ea terata e tsoelipanang, e entsoeng ke mokhanni oa Aluminium le lera le sireletsang. Ka mor'a hore lithapo tse se nang letho li annealed li nolofatse, ebe ka makhetlo a mangata li penta, 'me li chesa ho sehlahisoa se felileng. Enameled Aluminium terata ke thepa ea mantlha bakeng sa mochini oa motlakase, sesebelisoa sa motlakase, sesebelisoa sa ntlo, ect.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela sa Mohlala

Kenyelletso ea mohlala
SehlahisoaMofuta	PEW/130	PEW/155	UEW/130	UEW/155	UEW/180	EIW/180	EI/AIW/200	EI/AIW/220
Tlhaloso e Akaretsang	130 Kereiti Polyester	Polyester e fetotsoeng ea sehlopha sa 155	155 KereitiSboqhetsekePoliurethane	155 KereitiSboqhetsekePoliurethane	180KereitiSotlolohileWkhalehilePoliurethane	180KereitiPolyesterIea ka	200KereitiPolyamide e kopanya polyester e kopantsoeng	220KereitiPolyamide e kopanya polyester e kopantsoeng
IECTataiso	IEC60317-3	IEC60317-3	IEC 60317-20, IEC 60317-4	IEC 60317-20, IEC 60317-4	IEC 60317-51,IEC 60317-20	IEC 60317-23, IEC 60317-3, IEC 60317-8	IEC60317-13	IEC60317-26
Tataiso ea NEMA	NEMA MW 5-C	NEMA MW 5-C	MW75C	MW 79, MW 2, MW 75	MW 82, MW79, MW75	MW 77, MW 5, MW 26	NEMA MW 35-C NEMA MW 37-C	NEMA MW 81-C
UL-Amohelo	/	EE	EE	EE	EE	EE	EE	EE
Diameters E fumaneha	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm	0.03mm-4.00mm
Index ea Mocheso (°C)	130	155	155	155	180	180	200	220
Thempereichara e Nolofatsang (°C)	240	270	200	200	230	300	320	350
Thermal Shock Temperature(°C)	155	175	175	175	200	200	220	240
Solderability	Ha e chesehe	Ha e chesehe	380 ℃/2s E ka rekisoa	380 ℃/2s E ka rekisoa	390 ℃/3s E ka rekisoa	Ha e chesehe	Ha e chesehe	Ha e chesehe
Litšobotsi	Ho hanyetsa mocheso o motle le matla a mochine.	Khahlanong le lik'hemik'hale tse babatsehang; khanyetso e ntle ea mengoapo; ho fokola ha hydrolysis	Mocheso o bonolo oa ho senya o phahame ho feta UEW/130; ho bonolo ho daea; tahlehelo e tlase ea dielectric ka maqhubu a phahameng; ha ho na sekoti sa metsi a letsoai	Mocheso o bonolo oa ho senya o phahame ho feta UEW/130; ho bonolo ho daea; tahlehelo e tlase ea dielectric ka maqhubu a phahameng; ha ho na sekoti sa metsi a letsoai	Mocheso o bonolo oa ho senya o phahame ho feta UEW/155; mocheso o otlolohileng oa soldering ke 390 ° C; ho bonolo ho daea; tahlehelo e tlase ea dielectric ka maqhubu a phahameng; ha ho na sekoti sa metsi a letsoai	Ho hanyetsa mocheso o phahameng; khanyetso e babatsehang ea lik'hemik'hale, mocheso o phahameng oa mocheso, ho senyeha ho phahameng ho nolofatsang	Ho hanyetsa mocheso o phahameng; botsitso ba mocheso; sehatsetsi se thibelang serame; ho senyeha ho phahameng ho nolofatsang; tshoso e phahameng ya mocheso	Ho hanyetsa mocheso o phahameng; botsitso ba mocheso; sehatsetsi se thibelang serame; ho senyeha ho phahameng ho nolofatsang; lebelo le phahameng la mocheso
Kopo	Enjene e tloaelehileng, transformer e mahareng	Enjene e tloaelehileng, transformer e mahareng	Li-relays, li-micro-motor, li-transformer tse nyane, li-coil tse khantšang, li-valve tsa ho emisa metsi, lihlooho tsa makenete, likhoele tsa lisebelisoa tsa puisano.	Li-relays, li-micro-motor, li-transformer tse nyane, li-coil tse khantšang, li-valve tsa ho emisa metsi, lihlooho tsa makenete, likhoele tsa lisebelisoa tsa puisano.	Li-relays, li-micro-motor, li-transformer tse nyane, li-coil tse khantšang, li-valve tsa ho emisa metsi, lihlooho tsa makenete, likhoele tsa lisebelisoa tsa puisano.	Sefetoleli se qoelisoang ka oli, enjene e nyane, enjene e matla a phahameng, mochini o futhumatsang mocheso o phahameng, karolo e sa keneleng mocheso.	Sefetoleli se qoelisoang ka oli, enjene ea matla a phahameng, transformer ea mocheso o phahameng, karolo e thibelang mocheso, enjene e tiisitsoeng.	Sefetoleli se qoelisoang ka oli, enjene ea matla a phahameng, transformer ea mocheso o phahameng, karolo e thibelang mocheso, enjene e tiisitsoeng.

Lintlha tsa Sehlahisoa

IEC 60317(GB/T6109)

Mekhatlo ea Tech & Specification ea lithapo tsa k'hamphani ea rona li tsamaisong ea yuniti ea machaba, e nang le yuniti ea millimeter (mm). Haeba u sebelisa American Wire Gauge (AWG) le British Standard Wire Gauge (SWG) , tafole e latelang ke tafole ea papiso bakeng sa referense ea hau.

Boemo bo khethehileng ka ho fetisisa bo ka etsoa ho latela litlhoko tsa bareki.

Papiso ea Tech & Specification ea Metal Conductors e fapaneng

TŠEPE	Koporo	Aluminium Al 99.5	CCA10% Koporo Aluminium e khabisitsoeng	CCA15% Copper Clad Aluminium	CCA20% Koporo Aluminium e khabisitsoeng
Diameter fumaneha [mm] Min - Max	0.03mm-2.50mm	0.10mm-5.50mm	0.05mm-8.00mm	0.05mm-8.00mm	0.05mm-8.00mm
Botenya [g/cm³] Nom	8.93	2.70	3.30	3.63	4.00
*Conductivity[S/m 10**6]	58.5	35.85	36.46	37.37	39.64
IACS[%] Nom	101	62	62	65	69
Thempereichara-Coefficient[10-6/K] Min - Max ea ho hanyetsa motlakase	3800 - 4100	3800 - 4200	3700 - 4200	3700 - 4100	3700 - 4100
Elongation(1)[%] Nom	25	20	15	16	17
Matla a tšepe(1)[N/mm²] Nom	260	110	130	150	160
Flex Bophelo(2)[%] Nom 100% = Cu	100	20	50	80
Tšepe ea ka ntle ka molumo[%] Nom	-	-	8-12	13-17	18-22
Tšepe ea ka ntle ka boima[%] Nom	-	-	28-32	36-40	47-52
Weldability/Solderability[--]	++/++	+/--	++/++	++/++	++/++
Thepa	Conductivity e phahameng haholo, matla a matle a tensile, bolelele bo phahameng, moea o matla haholo, ho cheseha hantle le ho solderability	Boima bo fokolang haholo bo lumella ho fokotsa boima ba 'mele, ho senya mocheso ka potlako, ho fokotsa mocheso	CCA e kopanya melemo ea Aluminium le Koporo. Boima bo tlase bo lumella phokotso ea boima ba 'mele, conductivity e phahameng le matla a tsitsitseng ha a bapisoa le Aluminium, weldability e ntle le solderability, e khothalletsoang bophara ba 0.10mm ho ea holimo.	CCA e kopanya melemo ea Aluminium le Koporo. Boima bo tlase bo lumella ho theola boima ba 'mele, conductivity e phahameng le matla a tsitsitseng ha a bapisoa le Aluminium, weldability e ntle le solderability, e khothalletsoang bakeng sa boholo bo botle haholo ho fihla ho 0.10mm	CCA e kopanya melemo ea Aluminium le Koporo. Boima bo tlase bo lumella ho theola boima ba 'mele, conductivity e phahameng le matla a tsitsitseng ha a bapisoa le Aluminium, weldability e ntle le solderability, e khothalletsoang bakeng sa boholo bo botle haholo ho fihla ho 0.10mm
Kopo	Mokhoa o akaretsang oa khoele bakeng sa ts'ebeliso ea motlakase, mohala oa HF litz. E sebelisoa indastering, likoloi, lisebelisoa, lisebelisoa tsa elektroniki tsa bareki	Ts'ebeliso e fapaneng ea motlakase e hlokang boima bo tlase, mohala oa HF litz. E sebelisoa indastering, likoloi, lisebelisoa, lisebelisoa tsa elektroniki tsa bareki	Sebuela-hole, sebuela-pele le li-earphone, HDD, ho futhumala ha induction ka tlhoko ea ho felisoa hantle.	Sebuela-hole, li-headphone le li-earphone, HDD, ho futhumala ha induction ka tlhoko ea ho felisoa hantle, mohala oa HF litz.	Sebuela-hole, li-headphone le li-earphone, HDD, ho futhumala ha induction ka tlhoko ea ho felisoa hantle, mohala oa HF litz.

Tlhaloso ea Enameled Aluminium Wire

Bophara ba lebitso (mm)	Mamello ea mokhanni (mm)	G1		G2
Bophara ba lebitso (mm)	Mamello ea mokhanni (mm)	Botenya bo fokolang ba filimi	Complete Maximum kantle bophara (mm)	Botenya bo fokolang ba filimi	Complete Maximum kantle bophara (mm)
0.10	0.003	0.005	0.115	0.009	0.124
0.12	0.003	0.006	0.137	0.01	0.146
0.15	0.003	0.0065	0.17	0.0115	0.181
0.17	0.003	0.007	0.193	0.0125	0.204
0.19	0.003	0.008	0.215	0.0135	0.227
0.2	0.003	0.008	0.225	0.0135	0.238
0.21	0.003	0.008	0.237	0.014	0.25
0.23	0.003	0.009	0.257	0.016	0.271
0.25	0.004	0.009	0.28	0.016	0.296
0.27	0.004	0.009	0.3	0.0165	0.318
0.28	0.004	0.009	0.31	0.0165	0.328
0.30	0.004	0.01	0.332	0.0175	0.35
0.32	0.004	0.01	0.355	0.0185	0.371
0.33	0.004	0.01	0.365	0.019	0.381
0.35	0.004	0.01	0.385	0.019	0.401
0.37	0.004	0.011	0.407	0.02	0.425
0.38	0.004	0.011	0.417	0.02	0.435
0.40	0.005	0.0115	0.437	0.02	0.455
0.45	0.005	0.0115	0.488	0.021	0.507
0.50	0.005	0.0125	0.54	0.0225	0.559
0.55	0.005	0.0125	0.59	0.0235	0.617
0.57	0.005	0.013	0.61	0.024	0.637
0.60	0.006	0.0135	0.642	0.025	0.669
0.65	0.006	0.014	0.692	0.0265	0.723
0.70	0.007	0.015	0.745	0.0265	0.775
0.75	0.007	0.015	0.796	0.028	0.829
0.80	0.008	0.015	0.849	0.03	0.881
0.85	0.008	0.016	0.902	0.03	0.933
0.90	0.009	0.016	0.954	0.03	0.985
0.95	0.009	0.017	1.006	0.0315	1.037
1.0	0.01	0.0175	1.06	0.0315	1.094
1.05	0.01	0.0175	1.111	0.032	1.145
1.1	0.01	0.0175	1.162	0.0325	1.196
1.2	0.012	0.0175	1.264	0.0335	1.298
1.3	0.012	0.018	1.365	0.034	1.4
1.4	0.015	0.018	1.465	0.0345	1.5
1.48	0.015	0.019	1.546	0.0355	1.585
1.5	0.015	0.019	1.566	0.0355	1.605
1.6	0.015	0.019	1.666	0.0355	1.705
1.7	0.018	0.02	1.768	0.0365	1.808
1.8	0.018	0.02	1.868	0.0365	1.908
1.9	0.018	0.021	1.97	0.0375	2.011
2.0	0.02	0.021	2.07	0.04	2.113
2.5	0.025	0.0225	2.575	0.0425	2.62

Papiso ea tsitsipano ea ts'ireletso ea ts'ebetso ea terata (lithapo tse entsoeng ka aluminium tse nang le enameled)

Bophara ba conductor (mm)	Khatello (g)	Bophara ba conductor (mm)	Khatello (g)
0.1	29	0.45	423
0.11	34	0.47	420
0.12	41	0.50	475
0.13	46	0.51	520
0.14	54	0.52	514
0.15	62	0.53	534
0.16	70	0.55	460
0.17	79	0.60	547
0.18	86	0.65	642
0.19	96	0.70	745
0.2	103	0.75	855
0.21	114	0.80	973
0.22	120	0.85	1098
0.23	131	0.90	1231
0.24	142	0.95	1200
0.25	154	1.00	1330
0.26	167	1.05	1466
0.27	180	1.10	1609
0.28	194	1.15	1759
0.29	208	1.20	1915
0.3	212	1.25	2078
0.32	241	1.30	2248

Ela hloko: Kamehla sebelisa mekhoa eohle e metle ea polokeho 'me u ele hloko litataiso tsa polokeho ea winder kapa moetsi e mong oa lisebelisoa.

Melemo ea ho sebelisa USAGE NOTICE

1. Ka kopo, sheba kenyelletso ea sehlahisoa ho khetha mohlala o nepahetseng oa sehlahisoa le litlhaloso ho qoba ho hlōleha ho sebelisa ka lebaka la litšobotsi tse sa lumellaneng.

2. Ha u amohela thepa, tiisa boima ba 'mele le hore na lebokose le ka ntle la ho paka le pshatlehile, le senyehile, le senyehile kapa le holofetse; Ha e ntse e ts'oaroa, e lokela ho tšoaroa ka hloko ho qoba ho sisinyeha ho etsa hore mohala o oele fatše ka kakaretso, o etsa hore ho se ke ha e-ba le hlooho ea khoele, terata e khomaretsoeng le ho se be le boemo bo boreleli.

3. Nakong ea polokelo, ela hloko tšireletso, thibela ho senyeha le ho pshatleha ka tšepe le lintho tse ling tse thata, 'me u thibele polokelo e tsoakiloeng ka motsoako oa manyolo, acid e matla kapa alkali. Lihlahisoa tse sa sebelisoeng li lokela ho phutheloa ka thata ebe li bolokoa ka har'a sephutheloana sa pele.

4. Mohala oa enameled o lokela ho bolokoa sebakeng sa polokelo se nang le moea o motlakase ho tloha lerōleng (ho kenyeletsoa lerōle la tšepe). Khanya ea letsatsi e tobileng e thibetsoe ho qoba mocheso o phahameng le mongobo. Sebaka se setle sa polokelo ke: mocheso ≤50 ℃ le mongobo o lekanyelitsoeng ≤ 70%.

5. Ha u tlosa spool e nang le enameled, hokela monoana oa letsoho le letona le monoana o bohareng ho lesoba le ka holimo la ntlha ea reel, 'me u tšoare poleiti e ka tlaase ka letsoho le letšehali. U se ke ua tšoara terata ea enameled ka ho toba ka letsoho la hao.

6. Nakong ea ts'ebetso ea matsoeli, spool e lokela ho kenngoa ka sekoahelong sa tefo ka hohle kamoo ho ka khonehang ho qoba tšenyo ea mohala kapa tšilafalo ea solvent; Ha o ntse o lefa, tsitsipano e ts'oanelang e lokela ho fetoloa ho ea ka tafole ea ts'ireletso ea ts'ireletso, e le ho qoba ho robeha ha terata kapa terata e telele e bakoang ke tsitsipano e feteletseng, 'me ka nako e ts'oanang, ho qoba ho kopana le terata le lintho tse thata, ho fella ka pente. tšenyo ea filimi le potoloho e khutšoanyane e futsanehileng.

7. Ela hloko mahloriso le palo ea solvent (methanol le anhydrous ethanol li buelloa) ha u kopanya motsoako oa ho itšehla thajana, 'me u ele hloko ho lokisoa ha sebaka se pakeng tsa phala ea moea o chesang le hlobo le mocheso ha bonding the hot melt bonded self-adhesive line.

E fetileng: Wholesale Stable Performance Enameled Copper Wire bakeng sa Winding motor transfomer

E 'ngoe: 10A Enameled Copper Clad Aluminium Wire Class 130155 bakeng sa matsoelintsoeke a motlakase oa motlakase

Ngola molaetsa wa hao mona mme o re romele wona

Tlhaloso e Khutšoanyane:

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Selelekela sa Mohlala

Lintlha tsa Sehlahisoa

Melemo ea ho sebelisa USAGE NOTICE

Lihlopha tsa lihlahisoa